192.168.0.1 - Router Admin Login
192.168.0.1 is the primary default IP address assigned to routers manufactured by TP-Link, D-Link, Netgear (select models), and Tenda.
192.168.0.1 Gateway Admin Access
To access your router administration panel, enter the IP into your web browser or click the direct login button below:
http://192.168.0.1
* Make sure your device is connected to your router via Wi-Fi or Ethernet cable before clicking.
IP Classification
Class C Private IPv4
Default Subnet Mask
255.255.255.0
Default Username
adminDefault Password
admin
192.168.0.1 operates as the gateway address inside class C private subnet networks. By connecting to this IP address in your browser, you access the firmware dashboard where wireless frequencies, port forwarding, firewall security, and guest networks can be customized.
### Steps to Access 192.168.0.1
1. Ensure your device is connected to the router either via Wi-Fi or Ethernet.
2. In your browser's address bar, type `http://192.168.0.1` and hit Enter.
3. When the login screen prompts for credentials, enter the factory defaults or your custom password.
4. After entering the dashboard, immediately change the default admin password to ensure wireless network security.
Router Brand & Model Password List for 192.168.0.1
Select your brand or type your model below to discover factory-assigned login credentials:
| Brand | Model | Protocol | Default Username | Default Password | Action |
|---|---|---|---|---|---|
| TP-Link | Archer AX55 (AX3000) | HTTP | admin |
admin |
|
| TP-Link | Archer AX73 (AX5400) | HTTP | admin |
admin |
|
| TP-Link | Archer C7 (AC1750) | HTTP | admin |
admin |
|
| TP-Link | TL-WR841N Wireless N | HTTP | admin |
admin |
|
| TP-Link | Archer C6 Gigabit | HTTP | admin |
admin |
|
| D-Link | DIR-882 EXO AC2600 | HTTP | admin |
(blank) |
|
| D-Link | DIR-842 AC1200 Wave 2 | HTTP | admin |
(blank) |
|
| D-Link | EXO AX5400 (DIR-X5460) | HTTP | admin |
admin |
|
| D-Link | COVR-X1870 Mesh Wi-Fi 6 | HTTP | admin |
(blank) |
|
| Tenda | AC1200 Dual-Band AC6 | HTTP | admin |
admin |
|
| Tenda | TX9 Pro AX3000 Wi-Fi 6 | HTTP | admin |
admin |
|
| Tenda | AC23 AC2100 Gigabit | HTTP | admin |
admin |
|
| Tenda | RX12 Pro Dual-Band Gigabit | HTTP | admin |
admin |
|
| Arris | SURFboard SBG10 AC1600 Modem Router | HTTP | admin |
password |
|
| Arris | SURFboard G34 DOCSIS 3.1 & AX3000 | HTTP | admin |
password |
|
| Arris | TG3452 Touchstone Telephony Gateway | HTTP | admin |
password |
|
| ZyXEL | C3000Z CenturyLink Gateway | HTTP | admin |
admin |
Important Security Tips for 192.168.0.1
-
Change Factory Password Immediately: Factory passwords like
adminorpasswordare publicly documented in databases like this one. Change your administrator password on your first login. - Enable WPA3 or WPA2-AES: Ensure your Wi-Fi encryption is set to WPA3-Personal or WPA2-AES. Avoid legacy WEP or TKIP algorithms which can be cracked in minutes.
- Disable WPS (Wi-Fi Protected Setup): WPS PINs are susceptible to brute-force Reaver attacks. Turning off WPS in the Wireless settings protects your network even if someone has physical proximity.
Frequently Asked Questions about 192.168.0.1
What is the default login for TP-Link 192.168.0.1?
Modern TP-Link routers prompt you to create an administrator password during initial setup. Older models use admin for both username and password, or tplinkwifi.net.
Why does 192.168.0.1 say "This site can't be reached"?
Check if your router actually uses 192.168.0.1. Open Command Prompt, run `ipconfig`, and verify your "Default Gateway" matches 192.168.0.1.